Chevrolet Performance 366 C.I.D. Chevy LS & LT Crate Engine
Chevrolet Performance · Chevy LS/LT · 6.0L/366 · Chevy LS & LT Crate Engines | SKU# NAL-19353405
IDNAL-19353405 Buy with confidence
Listed by part number · full manufacturer specification · freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid and included-parts list, so you know exactly what ships.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Engines ship palletised by freight carrier to all 50 states. We quote the exact freight cost to your address before you commit.
Shipping ratesPayment options
Card, wire or bank transfer, with third-party finance plans available subject to the lender’s approval.
How to payDetails
General
| Catalogue ID | ENG85193 |
|---|---|
| Summit part # | NAL-19353405 |
| Manufacturer part # | 19353405 |
| Brand | Chevrolet Performance |
| Product line | Chevrolet Performance 6.0L 366 C.I.D. L76 Remanufactured Crate Engines |
| Category | Chevy LS & LT Crate Engines |
| Part type | Crate Engines |
| Engine family | Chevy LS/LT |
| Fits | Chevrolet |
| Availability | Backorder |
| Est. ship date | Feb 15, 2027 |
Manufacturer specifications
28 fields as published by Chevrolet Performance.
| Crate Engine Family | Chevy LS |
|---|---|
| Actual Engine Displacement | 6.0L/366 |
| Crate Engine Cylinder Head Material | Aluminum |
| Engine Block Material | Aluminum |
| Advertised Compression Ratio | 9.7:1 |
| Assembled | Yes |
| Engine Balance | Internal |
| Cam Style | Hydraulic roller, OE roller |
| Rear Main Seal Style | 1-piece |
| Intake Manifold Included | No |
| Cylinder Heads Included | Yes |
| Carburetor Included | No |
| Throttle Body Included | No |
| Distributor Included | No |
| Oil Pan Included | Yes |
| Valve Covers Included | Yes |
| Timing Cover Included | Yes |
| Water Pump Included | No |
| Harmonic Balancer Included | No |
| Flexplate Included | No |
| Flywheel Included | No |
| Air Cleaner Included | No |
| Spark Plugs Included | No |
| Spark Plug Wires Included | No |
| Computer Included | No |
| Wiring Harness Included | No |
| Supercharger Included | No |
| Remanufactured | Yes |
Spread the cost
Finance plans are offered by independent lenders and are subject to their approval. Send a request and we pass it on.
Subject to lender approval. We are not the lender and make no credit decision.
About this engine
Overview
This Chevrolet Performance crate engine is a remanufactured 6L (366 c.i.d.) Chevy LS / LT assembly, with a 9.7:1 compression ratio. It is built with aluminum block, aluminum cylinder heads and a hydraulic roller, oe roller camshaft.
Manufacturer description
Chevrolet Performance 6.0L 366 C.I.D. L76 Remanufactured Crate Engines Whether you're looking to build a reliable engine for towing and hauling or want the foundation for a high-performance build, the Chevrolet Performance 6.0L 366 C.I.D. L76 Remanufactured Crate Engines are a great starting point and at a more affordable cost. These crate engines boast a number of features and benefits. Each engine is tested to meet or exceed GM's original equipment specifications. Additionally, every component is inspected and replaced if necessary. As a result, these remanufactured crate engines provide excellent value and dependability. Specific information (instructions): The replacement crate engines are built with two different designed oil pans. Differences are the first design oil pan has threaded hole for oil level sensor; the second design oil pan is without hole for the oil level sensor. Transfer oil pan from original engine or procure new, if required. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. --Refer to instruction sheet for general/detailed information and instructions on components that are required to be transferred from the original engine assembly or procured new. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. The replacement engine is built with a first or second design oil pan. The first design pan has a threaded hole for applications equipped with an oil level sensor. The second design oil pan is for applications that do not use an oil level sensor; no threaded hole. Transfer oil pan from original engine or procure new, if required. The replacement engine is built with first or second design valve rocker arm covers. The first design valve covers do not use quick connect PCV tubes. The second design valve covers use quick connect PCV tubes. Transfer valve covers from original engine or procure new, if required. The replacement engine may use rivet-type plugs in place of the coolant air bleed covers located at the top rear of each cylinder head. In applications that contain the rivet-type plug, it is not necessary to install the coolant bleed covers. For LS4 Applications, transfer the A/T flywheel/flexplate locator that is pressed into the rear hub of the crankshaft from the original engine or procure new. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. For 2007 Cadillac Escalade and GMC Yukon Denali applications w/6.2L L92: Engines prior to April 2006 were built with AFM (Active Fuel Management) hardware components, but the AFM system is not enabled on the 2007 L92 engine. The replacement engine does not contain the AFM hardware; it includes a valley cover that is used in place of the VLOM (valve lifter oil manifold). Do not transfer AFM hardware to replacement engine. When performing an engine replacement on a L92 engine that was originally equipped with AFM hardware, the VLOM electrical connector must be removed from the wiring harness. Included Engine Content: * Engine Block * Pistons * Crankshaft * Connecting Rods * Cylinder Head * Camshaft * Front Cover * Housing, Cr/Shf Rear Oil Seal * Valve Cover/Cam Cover * Valve lifter Oil Manifold (VLOM) * Oil Pan
What is included
This crate engine arrives with the following fitted:
- Cylinder Heads
- Oil Pan
- Timing Cover
- Valve Covers
About the Chevy LS & LT platform
The LS is the defining swap engine of the last twenty years: an all-aluminium (or iron-block engine) pushrod V8 that is short, light, and makes more power per dollar than anything else you can bolt to a transmission. The Gen V LT that followed added direct injection and variable valve timing.
- Enormous aftermarket — headers, oil pans, accessory drives and swap mounts exist for almost every chassis
- Compact for its displacement: an LS fits where a small block Chevy fits, and often weighs less
- Responds dramatically to a cam and intake, and takes boost well with forged internals
- Junkyard-to-crate continuum means parts and knowledge are everywhere
Key specifications
- Part number: NAL-19353405
- Manufacturer part number: 19353405
- Brand: Chevrolet Performance
- Part type: Crate Engines
- Assembly: Crate Engine
- Condition: Remanufactured
- Engine family: Chevy LS/LT
- Displacement: 6L (366 c.i.d.)
- Compression ratio: 9.7:1
- Block material: Aluminum
- Cylinder head material: Aluminum
- Camshaft style: Hydraulic roller, OE roller
- Engine balance: Internal
- Rear main seal: 1-piece
- Aspiration: Naturally Aspirated
Ideal for
Builders choose a Chevrolet Performance crate engine like this one for LS swaps into classic engines and muscle cars, street and strip builds, boosted combinations, restomod projects and off-road and rock-crawler buggies. Arriving assembled means fewer parts to source, one warranty to deal with, and a far shorter path from crate to running engine.
Ordering & shipping
Priced at $7,373, this Chevrolet Performance crate engine is listed under part number NAL-19353405. Current estimated availability is Feb 15, 2027. Engines ship freight on a pallet; call or send an inquiry to confirm availability, freight cost to your address, and core-return requirements before you order.
California Proposition 65
This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Features
You may also like
View all ›
BluePrint Engines 376 C.I.D. 700 HP Chevy LS & LT Long Block MLL-S0037
6.2L/376 · 700 hp
$23,299
Chevrolet Performance 376 C.I.D. 650 HP Chevy LS & LT Crate Engine
6.2L/376 · 650 hp
$20,805
BluePrint Engines 427 C.I.D. 800 HP Chevy LS & LT Long Block MLL-S0038
7.0L/427 · 800 hp
$26,399
Edelbrock 416 C.I.D. 851 HP Chevy LS & LT Long Block EDL-46756
6.8L/416 · 851 hp
$35,627
Our price
$7,373.99
Chevrolet Performance 366 C.I.D. Chevy LS & LT Crate Engine
SKU# NAL-19353405 · est. $154/mo*




