
BluePrint Engines 585 HP Chevy LS & LT Engine & Transmission MLL-BLS4278KT56
BluePrint Engines · Chevy LS/LT · Engine & Transmission Combos | SKU# MLL-BLS4278KT56 New
IDMLL-BLS4278KT56 1 / 7 Buy with confidence
Listed by part number · full manufacturer specification · freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid and included-parts list, so you know exactly what ships.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Engines ship palletised by freight carrier to all 50 states. We quote the exact freight cost to your address before you commit.
Shipping ratesPayment options
Card, wire or bank transfer, with third-party finance plans available subject to the lender’s approval.
How to payDetails
General
| Catalogue ID | ENG56790 |
|---|---|
| Summit part # | MLL-BLS4278KT56 |
| Manufacturer part # | BLS4278KT56 |
| UPC | 00887753986481 |
| Brand | BluePrint Engines |
| Product line | BluePrint Builder Series LS427/585HP Standard Edition EFI Crate Engine and T56 Transmission Combos |
| Category | Engine & Transmission Combos |
| Part type | Engine and Transmission Combos |
| Engine family | Chevy LS/LT |
| Fits | Chevrolet |
| Availability | Backorder |
| Est. ship date | Dec 17, 2026 |
Manufacturer specifications
24 fields as published by BluePrint Engines.
| Crate Engine Family | Chevy LS |
|---|---|
| Engine Assembly Style | Long block |
| Assembled | Yes |
| Intake Manifold Included | Yes |
| Carburetor Included | No |
| Throttle Body Included | Yes |
| Cylinder Heads Included | Yes |
| Cylinder Head Material | Cast aluminum |
| Distributor Included | No |
| Oil Pan Included | Yes |
| Valve Covers Included | Yes |
| Timing Cover Included | Yes |
| Water Pump Included | Yes |
| Harmonic Balancer Included | Yes |
| Spark Plugs Included | Yes |
| Spark Plug Wires Included | Yes |
| Flexplate Included | No |
| Flywheel Included | Yes |
| Transmission Controller Included | No |
| Torque Converter Included | No |
| Wiring Harness Included | Yes |
| Computer Included | Yes |
| Reluctor Wheel Tooth Quantity | 58 |
| Special Attention | Includes Holley Terminator X Max Gen IV complete EFI engine management system, harness, starter, drive-by-wire pedal and throttle body. Polished front accessory drive system includes water pump, alternator, power steering pump, A/C compressor and all belts and pulleys. |
Spread the cost
Finance plans are offered by independent lenders and are subject to their approval. Send a request and we pass it on.
Subject to lender approval. We are not the lender and make no credit decision.
About this engine
Overview
This BluePrint Engines engine & transmission is a brand-new Chevy LS / LT assembly rated at 585 horsepower. It is built with cast aluminum cylinder heads. Induction is fuel injected. It is supplied as a matched package with a T56 Manual transmission.
Manufacturer description
BluePrint Builder Series LS427/585HP Standard Edition EFI Crate Engine and T56 Transmission Combos The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning. Includes Holley Terminator X Max Gen IV complete EFI engine management system, harness, starter, drive-by-wire pedal and throttle body. Polished front accessory drive system includes water pump, alternator, power steering pump, A/C compressor and all belts and pulleys.
What is included
This engine & transmission arrives with the following fitted:
- Computer
- Cylinder Heads
- Flywheel
- Harmonic Balancer
- Intake Manifold
- Oil Pan
- Spark Plug Wires
- Spark Plugs
- Throttle Body
- Timing Cover
- Valve Covers
- Water Pump
- Wiring Harness
About the Chevy LS & LT platform
The LS is the defining swap engine of the last twenty years: an all-aluminium (or iron-block engine) pushrod V8 that is short, light, and makes more power per dollar than anything else you can bolt to a transmission. The Gen V LT that followed added direct injection and variable valve timing.
- Enormous aftermarket — headers, oil pans, accessory drives and swap mounts exist for almost every chassis
- Compact for its displacement: an LS fits where a small block Chevy fits, and often weighs less
- Responds dramatically to a cam and intake, and takes boost well with forged internals
- Junkyard-to-crate continuum means parts and knowledge are everywhere
Key specifications
- Part number: MLL-BLS4278KT56
- Manufacturer part number: BLS4278KT56
- Brand: BluePrint Engines
- Part type: Engine and Transmission Combos
- Assembly: Engine & Transmission
- Condition: New
- Engine family: Chevy LS/LT
- Horsepower: 585 hp
- Cylinder head material: Cast aluminum
- Induction: Fuel Injected
- Aspiration: Naturally Aspirated
- Transmission: T56 Manual
- UPC: 00887753986481
Ideal for
Builders choose a BluePrint Engines engine & transmission like this one for complete driveline swaps, restomod projects, first-time builders who want matched parts, shops wanting a single warranty and chassis builds starting from scratch. Arriving assembled means fewer parts to source, one warranty to deal with, and a far shorter path from crate to running engine.
Ordering & shipping
Priced at $26,399, this BluePrint Engines engine & transmission is listed under part number MLL-BLS4278KT56 (UPC 00887753986481). Current estimated availability is Dec 17, 2026. Engines ship freight on a pallet; call or send an inquiry to confirm availability, freight cost to your address, and core-return requirements before you order.
California Proposition 65
This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Features
You may also like
View all ›
BluePrint Engines 426 C.I.D. 872 HP Mopar Hemi Engine & Transmission MLL-B426SCTKB4L8
872 hp
$39,599
BluePrint Engines 427 C.I.D. 605 HP Chevy LS & LT Engine & Transmission MLL-BLS4273KBT56
605 hp
$27,299
BluePrint Engines 426 C.I.D. 872 HP Mopar Hemi Engine & Transmission MLL-B426SCTKT56
872 hp
$35,899
BluePrint Engines 800 HP Chevy LS & LT Engine & Transmission MLL-S0023
800 hp
$35,399
Our price
$26,399
BluePrint Engines 585 HP Chevy LS & LT Engine & Transmission MLL-BLS4278KT56
SKU# MLL-BLS4278KT56 · est. $550/mo*



