BluePrint Engines logo

BluePrint Engines 426 C.I.D. 872 HP Mopar Hemi Dressed Long Block MLL-PS426SCTK

BluePrint Engines · Mopar Hemi · 7.0L/426 · Mopar Hemi Crate Engines | SKU# MLL-PS426SCTK New

BluePrint Engines 426 C.I.D. 872 HP Mopar Hemi Dressed Long Block MLL-PS426SCTK IDMLL-PS426SCTK

Buy with confidence

Listed by part number · full manufacturer specification · freight to all 50 states

Specified in full

Every listing carries the manufacturer’s complete specification grid and included-parts list, so you know exactly what ships.

What is included

Core returns & warranty

Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.

How it works

Freight nationwide

Engines ship palletised by freight carrier to all 50 states. We quote the exact freight cost to your address before you commit.

Shipping rates

Payment options

Card, wire or bank transfer, with third-party finance plans available subject to the lender’s approval.

How to pay
Included with every engine: Pre-shipment inspectionTitle & customs paperworkDelivery quoteImport compliance
Questions? (470) 201-3931

Details

Displacement 7.0L/426
Horsepower 872 hp
Assembly Dressed Long Block
Induction Fuel Injected
Compression 10.48:1
Block Cast iron
Condition New
Part # MLL-PS426SCTK

General

Catalogue ID ENG53086
Summit part # MLL-PS426SCTK
Manufacturer part # PS426SCTK
UPC 00887753915986
Brand BluePrint Engines
Product line BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP EFI Deluxe Dressed Long Block Crate Engines
Category Mopar Hemi Crate Engines
Part type Crate Engines
Engine family Mopar Hemi
Fits Dodge
Availability Backorder
Est. ship date Dec 17, 2026

Manufacturer specifications

33 fields as published by BluePrint Engines.

Crate Engine Family Mopar Hemi Gen III
Actual Engine Displacement 7.0L/426
Crate Engine Cylinder Head Material Aluminum
Engine Block Material Cast iron
Advertised Compression Ratio 10.48:1
Assembled Yes
Engine Balance Internal
Cam Style Hydraulic roller, OE roller
Rear Main Seal Style 1-piece
Intake Manifold Included Yes
Intake Manifold Style Fuel Injection
Cylinder Heads Included Yes
Carburetor Included No
Throttle Body Included Yes
Distributor Included No
Oil Pan Included Yes
Valve Covers Included Yes
Timing Cover Included Yes
Water Pump Included Yes
Harmonic Balancer Included Yes
Flexplate Included No
Flywheel Included No
Air Cleaner Included No
Spark Plugs Included Yes
Spark Plug Wires Included Yes
Computer Included Yes
Wiring Harness Included Yes
Stall Speed Rating RPM Range 2,500-3,500
Supercharger Included Yes
Supercharger Model Whipple 3.0L Twin Screw
Remanufactured No
Notes Includes a polished front accessory drive system and serpentine belt.
Special Attention Includes complete Holley Terminator engine harness, ECU, drive-by-wire pedal, harness, sensors, throttle body, intake, injectors, and fuel rails.

Spread the cost

Finance plans are offered by independent lenders and are subject to their approval. Send a request and we pass it on.

Estimated from $577/mo
Call (470) 201-3931

Subject to lender approval. We are not the lender and make no credit decision.

About this engine

Overview

This BluePrint Engines dressed long block is a brand-new 7L (426 c.i.d.) Mopar Hemi assembly rated at 872 horsepower, with a 10.48:1 compression ratio. It is built with cast iron block, aluminum cylinder heads and a hydraulic roller, oe roller camshaft. Induction is fuel injected and the engine is supercharged.

Manufacturer description

BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP EFI Deluxe Dressed Long Block Crate Engines BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2 Includes a polished front accessory drive system and serpentine belt. Includes complete Holley Terminator engine harness, ECU, drive-by-wire pedal, harness, sensors, throttle body, intake, injectors, and fuel rails.

What is included

This dressed long block arrives with the following fitted:

  • Computer
  • Cylinder Heads
  • Harmonic Balancer
  • Intake Manifold
  • Oil Pan
  • Spark Plug Wires
  • Spark Plugs
  • Supercharger
  • Throttle Body
  • Timing Cover
  • Valve Covers
  • Water Pump
  • Wiring Harness

About the Mopar Gen III Hemi platform

The Gen III Hemi revived the name in 2003 with a hemispherical-chamber V8 that makes strong power out of the box and takes a supercharger without complaint. The 5.7L, 6.4L 392 and supercharged 426 are the backbone of modern Mopar performance.

  • Excellent cylinder-head flow straight from the factory
  • Takes positive-displacement boost extremely well on forged internals
  • Supercharged 426 combinations reach 870-plus horsepower as a crate package
  • Drops into Challenger, Charger, Ram and an expanding list of swap chassis

Key specifications

  • Part number: MLL-PS426SCTK
  • Manufacturer part number: PS426SCTK
  • Brand: BluePrint Engines
  • Part type: Crate Engines
  • Assembly: Dressed Long Block
  • Condition: New
  • Engine family: Mopar Hemi
  • Displacement: 7L (426 c.i.d.)
  • Horsepower: 872 hp
  • Compression ratio: 10.48:1
  • Block material: Cast iron
  • Cylinder head material: Aluminum
  • Camshaft style: Hydraulic roller, OE roller
  • Engine balance: Internal
  • Rear main seal: 1-piece
  • Induction: Fuel Injected
  • Aspiration: Supercharged
  • UPC: 00887753915986

Ideal for

Builders choose a BluePrint Engines dressed long block like this one for Challenger and Charger builds, Hemi swaps, supercharged street cars, Ram engine repowers and muscle car restomods. Arriving assembled means fewer parts to source, one warranty to deal with, and a far shorter path from crate to running engine.

Ordering & shipping

Priced at $27,699, this BluePrint Engines dressed long block is listed under part number MLL-PS426SCTK (UPC 00887753915986). Current estimated availability is Dec 17, 2026. Engines ship freight on a pallet; call or send an inquiry to confirm availability, freight cost to your address, and core-return requirements before you order.

California Proposition 65

This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Features

ComputerCylinder HeadsHarmonic BalancerIntake ManifoldOil PanSpark Plug WiresSpark PlugsSuperchargerThrottle BodyTiming CoverValve CoversWater PumpWiring Harness

You may also like

View all ›
Call